L300 V6-3.0L VIN R (2001)
14. Install beam to steering column braces. Using a large screwdriver, pry steering column braces apart to clear beam studs and slide beam forward to
locate studs into boles.
NOTE:
^
Open drivers side door completely and install protective covering on door inner hinge area to prevent damage to paint.
^
On Wagons, the rear washer supply hose is routed through drivers side A-pillar. Use care not to pinch or damage hose.
15. Install cockpit assembly aid J 43894 into A-pillar beam bolt holes. Tool flange should fit tight to A-pillar surface when completely installed. This
tool is needed to prevent accidentally dropping a bolt inside A-pillar.