L300 V6-3.0L VIN R (2001)
52. Place temperature control knob in full cold position.
53. Rotate temperature door lever fully forward and press cable housing into retaining clip.
54. Cycle control head temperature lever from full cold to full hot to verify proper operation.
55. Connect radio ground strap spade terminal, electrical connector(s), and antenna to rear of radio.
56. Install radio by sliding it into the guides on the instrument panel.
57. Install and tighten screws.
Torque:
Radio-to-I/P Fasteners: 2.5 N.m (22 in-lbs)
