L300 V6-3.0L VIN R (2001)
8. Remove fuel level sender card by depressing locking tab and sliding card up (toward fuel pump cover).
IMPORTANT: The fuel pump assembly is only serviced as a module without the sender unit. The inlet filter can be cleaned with mineral spirits;
however, it cannot be replaced.
INSTALLATION
1. Slide new sender unit into place until click is heard. (Pulling up lightly to ensure sender unit is locked into place.)
IMPORTANT: Remove fuel pump from fuel tank.
2. Connect electrical connections.
IMPORTANT: The fuel pump module to tank seal must always be replaced whenever module is removed from fuel tank.
3. Install pump module and lock ring using a new tank seal.
4. Reconnect fuel lines and electrical connector to fuel pump.
5. Install fuel tank.