L300 V6-3.0L VIN R (2001)
20. Remove pressure transducer from suction/liquid line assembly.
INSTALLATION
NOTE: Use only mineral oil to lubricate O-rings. Use of PAG oil will cause premature corrosion of joint.
1. Install pressure transducer to suction/liquid line assembly.
Torque:
Pressure Transducer-to-Suction/Liquid Line: 7 N.m (62 in-lbs)
2. Position suction/liquid line assembly into vehicle around engine mount with liquid line inside of wiring harness and outside of fuel lines.