L300 V6-3.0L VIN R (2001)
8. Remove pedal position sensor.
INSTALLATION
1. Position pedal position sensor in bracket and install bolts.
Torque:
Accelerator Pedal Position Sensor Bolts: 6 N.m (53 in-lbs)
2. Connect position sensor to accelerator pedal linkage.
IMPORTANT: Do not tighten fasteners at this time.
3. Position pedal assembly in vehicle and install two lower pedal-to-front of dash attachment nuts.
4. Depress accelerator pedal and install upper pedal bracket-to-front of dash attachment nut.
5. Tighten nuts.
Torque:
Accelerator Pedal Bracket Nuts: 10 N.m (89 in-lbs)