L300 V6-3.0L VIN R (2001)
Fuel Injector: Description and Operation
Fuel Injector
Fuel Injector
The fuel injector assembly is a solenoid operated device, controlled by the PCM, that meters pressurized fuel to a single engine cylinder. The PCM
energizes the (12.0 ohms) solenoid to open a normally closed ball valve. This allows fuel to flow into the top of the fuel injector, past the ball valve, and
through a recessed flow director plate at the injector outlet. The director place has machined holes that control the fuel spray, generating a conical spray
pattern of finely atomized fuel at the valve, causing it to become further atomized and vaporized before entering the combustion chamber.
A fuel injector that is stuck partly open or leaking would cause a loss of fuel pressure after engine shut down, so long crank times would be noticed on
some engines. Dieseling also could occur because some fuel could be delivered to the engine after the ignition is turned to the Off position.
All Saturn fuel injectors are designed for a specific engine. They are not interchangeable between each engine option. When servicing the fuel injectors,
ensure that the correct injector is used for the specific engine.
