L300 V6-3.0L VIN R (2001)
21.
Ensure green terminal retainers of new throttle body connector, P/N 22720050, is in released position to insert terminals.
22.
Cut Ckt 581 YEL terminal #1 throttle body connector 63.5 mm (2-1/2 in) from connector on engine harness.
23.
Remove insulation from end of cut wire. Recommended strip length is 9.5 mm (3/8 in).
24.
Install splice sleeve included in terminal lead P/N 22690873, by positioning stripped end of engine harness Ckt 581 into sleeve until wire hits stop
in center of the splice sleeve.
