L300 V6-3.0L VIN R (2001)
Disclaimer
Service Procedure
Disabling Frontal Inflators (All)
1.
Turn the steering wheel so that the vehicle's wheels are pointing straight ahead.
2.
Turn ignition switch to the OFF position and remove key.
3.
Remove IGN1 mini-fuse from underhood fuse block.
4.
Remove lower left I/P closeout panel.
5.
Push out clips that secure the driver and passenger inflator module (YEL 2-way) connectors to I/P panel brace.
6.
Remove CPA retainers and disconnect both (YEL 2-way) connectors.
Disabling Curtain Inflators (Sedan)