L300 V6-3.0L VIN R (2001)
Inflatable Restraint Sensing and Diagnostic Module: Technician Safety Information
CAUTION: BE CAREFUL WHEN YOU HANDLE A SENSING AND DIAGNOSTIC MODULE (SDM). DO NOT STRIKE OR JOLT THE
SDM. BEFORE APPLYING POWER TO THE SDM:
^
REMOVE ANY DIRT, GREASE, ETC. FROM THE MOUNTING SURFACE.
^
POSITION THE SDM HORIZONTALLY ON THE MOUNTING SURFACE.
^
TIGHTEN ALL OF THE SDM FASTENERS AND SDM BRACKET FASTENERS TO THE SPECIFIED TORQUE VALUE.
FAILURE TO FOLLOW THE CORRECT PROCEDURES COULD CAUSE AIR BAG DEPLOYMENT, PERSONAL INJURY, OR
UNNECESSARY SIR SYSTEM REPAIRS.
