L300 V6-3.0L VIN R (2001)
Side Air Bag: Service and Repair
Curtain Inflator Modules (Air Bag) (If Equipped) - Sedan
CAUTION: SIR SYSTEM SHOULD BE DISABLED BEFORE REMOVAL OF INFLATOR. THE INFLATOR MUST BE DISPOSED OF
PROPERLY. ALL INTERIOR GARNISH MOLDING SNAP-IN CLIPS MUST BE REPLACED WHEN TRIM IS REMOVED FROM THE
VEHICLE. TWISTING OF THE INFLATOR MUST NOT BE ALLOWED.
REMOVAL
1. Disable the SIR system.
2. Remove headliner and garnish moldings from vehicle.
IMPORTANT: Clips and plastic guides must be removed from structure. Clips are designed for one use only. The new inflator assembly Will
contain new clips and plastic guides attached to the assembly.
3. Remove fasteners from inflator retention tabs and clips-to-structure in locations shown in illustration.
INSTALLATION
