L300 V6-3.0L VIN R (2001)
2. Route seat belt buckle wire through hole in seat frame and along seat frame beam. Insert connector into connector housing.
3. Strap seat belt buckle wire to seat frame.
4. Position seat in vehicle then tilt seat rearward and plug wiring harnesses into wire harness connector.
5. Position front seat slightly rearward of front seat track hooks.
6. Push seat forward to engage seat tracks into hooks.
7. Install front seat rear anchoring bolts.
Torque:
Front Seat Anchoring Bolts: 20 N.m (15 ft-lbs)