L300 V6-3.0L VIN R (2001)
Oxygen Sensor: Service and Repair
Heated Oxygen Sensor 1, Bank 1 and Bank 2
REMOVAL
1. Disconnect oxygen sensor electrical connector.
2. Remove oxygen sensor using 02 Sensor Wrench J 39194C.
INSTALLATION
1. Apply anti-seize material to threads of new oxygen sensor.
2. Install oxygen sensor using O2 Sensor Wrench J 39194C.
Torque:
Oxygen Sensors (Exhaust Manifold): 50 N.m (37 ft-lbs)
3. Connect oxygen sensor electrical connector.
