L300 V6-3.0L VIN R (2001)
5. Connect both the driver and passenger inflator module (YEL 2-way) connectors.
6. Fasten clips on yellow two-way connectors to I/P panel brace.
7. Install IGN1 mini-fuse in under hood fuse block.
8. Turn ignition On and verify AIR BAG telltale operates properly.
9. Install lower left I/P closeout panel.
Enabling the Frontal Inflators
1. Turn the steering wheel so that the vehicle's wheels are pointed straight ahead.
2. Turn ignition switch to LOCK position and remove key.
3. Connect both the driver and passenger inflator module (YEL 2-way) connectors.
4. Fasten clips on (YEL 2-way) connectors to I/P panel brace.
5. Install IGN1 fuse in under hood fuse block.
6. Turn ignition On and verify AIR BAG telltale operates properly.
7. Install lower left I/P closeout panel.