L300 V6-3.0L VIN R (2001)
25. Remove left drive axle from transaxle using a pry bar. Remove axle retaining ring from output shaft of transaxle and discard. The axle can be left
in the steering knuckle. Tie the axle up and out of the way.
26. Remove power steering lines from left transaxle mount bracket. Remove transaxle mount bracket fasteners and remove bracket.
NOTICE: Pry on side cover near locating dowel pins to prevent damage to sealing surfaces.
27. Remove remaining transaxle case side cover bolts and remove case side cover.
