L300 V6-3.0L VIN R (2001)
2.
Locate transaxle shift cable adjuster assembly shown in illustrations.
3.
Refer to illustrations and inspect transaxle shift cable retainer clip to ensure it is present and fully seated.
^
If transaxle shift cable retainer clip is present and fully seated, no further action is required. Continue to step 7.
4 cylinder engine equipped vehicle shown.
V6 engine equipped vehicle similar.
^
If transaxle shift cable retainer clip is present but not fully seated, properly install clip until it is seated and continue to step 5,
^
If transaxle shift cable retainer clip is not present, continue to next step.
4 cylinder engine equipped vehicle shown.
V6 engine equipped vehicle similar.
4.
Inspect transaxle shift cable retaining tabs and determine if they are properly seated and engaged in mounting bracket.