L300 V6-3.0L VIN R (2001)
Torque:
Splash Shield Fasteners: 5 N.m (44 ft-lbs)
29.
Install left front wheel liner push pin to frame.
30.
Connect 02 sensor electrical connector and reattach harness to frame.
31.
Lower vehicle and remove engine support fixture.
32.
Connect output speed sensor electrical connector. Secure harness to mounting stud.
33.
Install remaining engine-to-transaxle mounting bolts.
Torque:
Engine-to-Transaxle Bolts: 65 N.m (48 ft-lbs)