L300 V6-3.0L VIN R (2001)
16. Close fuse block and latch (2).
17. Replace fuse block cover and latch (2).
18. Snap engine cooling hose back in place on the cover.
19. Hook up battery feed to fuse block.
Torque: Battery Feed-to-Fuse Block: 16 Nm (12 ft. lbs.)
20. Place battery feed cover over battery feed terminal.
21. Install battery into vehicle.
22. Install battery hold down.
Torque: Battery Hold Down: 20 Nm (15 ft. lbs.)
23. Install fan control module by sliding down onto bracket.
24. Connect positive and then negative battery cable.
Torque: Battery Cable-to-Battery: 17 Nm (13 ft. lbs.)
