L300 V6-3.0L VIN R (2001)
Notice: To prevent corrosion, paint damage around the window opening by the power glass removal tool must be covered with pinchweld primer.
Do not prime over existing urethane. Follow manufacturers recommendations for drying time.
Important: Shake the glass prep primer (Clear #1) well before using.
5. For a new window assembly only, apply the glass prep primer (Clear #1) around the entire perimeter of the glass using a dauber. Wipe dry with a
clean, lint-free cloth
The primer area minimum width (A) is 18 mm (0.71 in).
Important: Shake the glass primer (Black #2) well before applying.
6. With a new dauber, apply the glass prep primer (Black #2) around the entire perimeter over Clear #1. Allow the primer to dry 5 minutes before
applying the urethane.
The primer area minimum width (A) is 18 mm (0.71 in).
7. Apply a smooth continuous bead of adhesive directly to the old urethane adhesive in the glass opening or to the glass. Apply according to the
dimensions shown.
*
The bead dimension for the minimum width (B) is 10 mm (0.39 in).
*
The bead dimension for the minimum height (C) is 14 mm (0.55 in).