L300 V6-3.0L VIN R (2001)
Rear Door Window Glass Weatherstrip: Service and Repair
Weatherstrip Replacement - Rear Door Window (New Style)
Rear Side Door Window Weatherstrip Replacement (New Style)
Removal Procedure
Important: The old 1-piece weatherstrip design will work in place of the new 2-piece design.
1. Lower the rear door window.
2. Remove the rear door trim panel. Refer to Rear Side Door Trim Panel Replacement See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair
3. Remove the rear door water deflector. Refer to Rear Side Door Water Deflector Replacement (See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair).
4. Verify if the front weatherstrip guide and weatherstrip is a 1-piece weatherstrip or the new 2-piece design.
5. Remove the bolt from the weatherstrip guide.
6. Remove the weatherstrip guide pressing down and out of the door.
7. Remove the weatherstrip from the door.
Installation Procedure