L Series V6-3.0L VIN R (2004)
1. Make sure the transaxle manual shaft is in the Neutral position.
2. Align the flats on the transaxle shift shaft with the flats on the transaxle range switch and install the switch.
3. Loosely install the transaxle range switch bolts.
4. Insert the J41545 as shown and rotate the switch until the tool drops onto position.
Notice: Refer to Fastener Notice in Cautions and Notices.
5. Tighten the transaxle range switch bolts.
Tighten the range switch bolts to 20 Nm (15 ft. lbs.).
6. Remove the alignment tool.
7. Install the transaxle range switch lever and nut
Tighten the transaxle range switch lever retaining nut to 35 Nm (26 ft. lbs.).
