L Series V6-3.0L VIN R (2004)
1. Install the weatherstrip guide to the door by pushing the clip on the guide up into the down slot.
2. Install the weatherstrip to the door.
Notice: Refer to Fastener Notice in Cautions and Notices.
3. Install the weatherstrip guide bolt.
Tighten the bolt to 10 (89 lb in).
4. Install the rear door trim panel. Refer to Trim Panel Replacement - Side Rear Door See: Body and Frame/Doors, Hood and Trunk/Doors/Rear
Door/Rear Door Panel/Service and Repair
5. Install the rear door water deflector. Refer to Water Deflector Replacement - Rear Door (See: Body and Frame/Doors, Hood and
Trunk/Doors/Rear Door/Rear Door Panel/Service and Repair).
6. Inspect the rear door window for proper alignment and operation.
Weatherstrip Replacement - Rear Door Window (Old Style)
Weatherstrip Replacement - Rear Door Window (Old Style)
Removal Procedure
Important: The old 1-piece weatherstrip design can not be serviced with the new 2-piece design without using the new window with the
concave front edge.