LS L4-2.2L VIN F (2000)
Hydraulic Control Assembly - Antilock Brakes: Service and Repair
REMOVAL
1. Disconnect negative battery cable.
NOTICE: Plug open brake pipes to prevent brake fluid loss and contamination.
2. Disconnect brake pipe nuts from module.
NOTICE: After removing brake pipe nuts, do not excessively pull or bend brake pipes away from brake control assembly.
NOTICE: Plug open brake pipes to prevent brake fluid loss and contamination.
3. Disconnect brake pipe nuts from master cylinder.
4. Slide out locking tab and disconnect ABS control module electrical connector.