LS2 V6-3.0L VIN R (2000)
e. Remove cargo net fasteners.
f.
Gently pull at Clip locations and remove rear cargo area side carpet.
20. Route Body CD jumper along the right side of vehicle starting at area between rear scat and rear compartment (sedan) or rear cargo area (wagon).
21. Route Body CD jumper connector through hole found beneath right rear seat bolster (for a sedan) or route jumper around rear seat support bracket
(for a wagon) and put enough of the harness through to reach CD changer/player location.
NOTE: Make sure the Body CD jumper is lined lip correctly with holes before attaching them. The clips are easily damaged when removed.
22. Install Body CD jumper to vehicle starting with jumper clip nearest the CD changer/player connector. Attach all of the other clips as you route the
Body CD jumper to rear seat area.
