LS2 V6-3.0L VIN R (2000)
43. Hold bracket in installation location.
44. Attach bracket to vehicle with screws.
Torque: 8 N.m (71 in-lbs)
45. Before fastening CD changer/player to bracket, make electrical connection and verify that CD changer/player is functioning properly.
46. Install CD changer/player to bracket.
Torque: 4 N.m (35 in-lbs)
47. If equipped with a convenience net, attach U-Nut to side attachment on CD changer/player bracket.
48. Attach convenience net to CD changer/player bracket.
49. Proceed to step 61, if vehicle is a sedan.
Reinstallation of Removed Parts From Harness Installation
IMPORTANT: Ensure that I/P harness connector, antenna connector, and the ground strap connector are connected.
