saturn Workshop Repair Guides

Saturn Workshop Service and Repair Manuals

Rear Bumper Fascia - Misaligned|Page 12956 > < Front Bumper Shock Absorber|Service and Repair|Page 12946
Page 1
background image

Rear Bumper Cover / Fascia: Customer Interest
Rear Bumper Fascia - Misaligned

BULLETIN NO.: 01-T-06A

ISSUE DATE: August, 2001

CATEGORY TYPE: Body - 02

CATEGORY: Rear End

CORPORATION NO.: 01-08-66-002A

SUBJECT: 
Rear Fascia Misaligned 
(Adjust Rear Fascia Mounting Spacers)

Due to a change in model years affected, this bulletin has been revised and supersedes bulletin 01-T-06, which should be discarded.

MODELS AFFECTED: 
2000 - 2002 Saturn L-Series Vehicles

CONDITION: 
Some customers may comment that the rear fascia to quarter panel is not correctly aligned.

CAUSE: 
This condition may be caused by incorrect tolerance stackup between fascia, fascia reinforcement and mounting surface.

CORRECTION: 
Adjust the fascia mounting spacer inward.

SERVICE PROCEDURE

1.

Raise rear compartment lid or liftgate.

2.

Remove plastic retainers from rear bumper fascia.

Rear Bumper Fascia - Misaligned|Page 12956 > < Front Bumper Shock Absorber|Service and Repair|Page 12946