LS2 V6-3.0L VIN R (2000)
Complete the worksheet shown and attach it to the hard copy of the Customer Service Order.
Service Procedure
Inside Front Door Handle Inspection Procedure
Important
It is possible to have a different manufacturer on each of the front door handles. Therefore, both left and right front door handles should be
inspected before being replaced.
1.
Using a small flat-bladed screwdriver, disengage the power door lock switch (or cover on non-power door lock vehicles) to expose the back of the
inside door handle.
2.
Using a flashlight or other light source view through the door lock switch mounting hole, inspect for presence of three reinforcement ribs molded