LS2 V6-3.0L VIN R (2000)
6. Push down to remove the guide from the lock tab.
7. Remove the inside door handle with the actuator rod from the latch mechanism.
8. Use a permanent marker to mark the lock cylinder rod to latch mechanism relationship for correct installation.
9. Remove the latch/lock mechanism from the door.
10. Slide the lock rod off lock cylinder arm.
11. Remove the power door lock electrical connector and the 2 actuator rods from the latch mechanism.
12. Remove the latch with lock rod.
13. Remove the lock rod from the latch mechanism.
Installation Procedure