LS2 V6-3.0L VIN R (2000)
Rear Door Panel: Service and Repair
Door Insulator
Rear Side Door Insulator
Removal Procedure
1. Remove the outer door panel. Refer to Rear Door Outer Panel
removal .
Important: Apply only enough tension so that the insulator panel releases from the door structure.
2. Remove the door insulator panel.
Installation Procedure
Important: Make sure the attaching points are clean and dry. If the insulator panel has been damaged during removal, it must be
replaced.
1. Install the insulator using the locating holes and position the insulator panel to the structure. Make sure proper alignment is achieved. Improper
alignment could cause outer panel misalignment.
2. Install the outer door panel. Refer to Rear Door Outer
Panel installation procedure .