LS2 V6-3.0L VIN R (2000)
Trunk / Liftgate Lock Cylinder: Service and Repair
Liftgate Lock Cylinder Replacement
Liftgate Lock Cylinder Replacement
Removal Procedure
1. Remove the lift gate pull handle plugs.
2. Remove the fasteners and the lift gate pull handle.
3. Remove the lift gate trim panel retainers.
4. Remove the trim panel.
5. Disconnect the electrical connector from the lock assembly.
6. Remove the lift gate lock assembly retaining nuts.
7. Disconnect the latch cable from the lock cylinder assembly.
8. Remove the cylinder assembly.
Installation Procedure