LS2 V6-3.0L VIN R (2000)
Ash Tray: Procedures
Console Front Ash Tray
REMOVAL
1. Remove center console.
2. Disconnect lighter harness from lighter.
3. Remove front ash tray fasteners and remove ash tray assembly.
INSTALLATION
1. If lighter is being replaced, transfer cigar lighter to new ash tray assembly.
2. Position ash tray assembly to center console and install fasteners.
Torque: 2 N.m (18 in-lbs)
3. Install console assembly.
Console Rear Ash Tray
REMOVAL
1. Using a small flat blade screwdriver, remove ash tray assembly from console.
INSTALLATION
2. Position ash tray assembly into opening and snap in retainer to engage ash tray to console.
Front Ash Tray Insert
