LS2 V6-3.0L VIN R (2000)
8. Push tumblers out of lock cylinder using a thin bladed screwdriver.
9. If necessary, remove sidebar assembly by pushing it inward while tapping the cylinder causing it to fall out.
10. Select the correct tumblers for the desired key code by the number stamped on the tumbler.
IMPORTANT: Make sure sidebar and tumbler springs are in place before installing tumblers
11. Install tumblers by applying downward pressure until they lock into position.
12. To check coding of cylinder, insert key. If coding is correct, tumblers will be flush with the cylinder with key inserted.
13. For assembly, oil lock set with a light oil or graphite lubricant.
14. Insert lock cylinder with key into cylinder housing, turn it a quarter turn counter clockwise to lock it into place
