LS2 V6-3.0L VIN R (2000)
12.
Install decklid lock cylinder rod to lock cylinder and new latch.
^
For Coupes, install new lock cylinder rod (included in kit).
^
For Sedans, use grinder or wire cutter and carefully remove 2 mm (5/64 in.) of length from latch end of existing lock cylinder rod.
IMPORTANT:
Vehicles equipped with or without the remote keyless entry (RKE) feature use the same trap-resistant latch that is included in the kit. This latch will
function properly on all vehicles.
13.
Reconnect vehicle interior release cable end fitting into lower slot of new trap-resistant latch, and clip cable conduit to latch housing.
14.
Insert release handle cable end fitting into upper slot of new trap-resistant latch, and clip cable conduit to latch housing.
