LS2 V6-3.0L VIN R (2000)
4.
Place handle ORN wire in approximately three feet of conduit (P/N 21023494) and route it through holes in the bottom of rear window panel over
to the cargo lamp.
5.
Remove cargo lamp housing and disconnect cargo lamp if needed.
IMPORTANT:
Refer to included wiring schematic for wire color and circuit information.
6.
Splice handle ORN wire to cargo lamp ORN wire, circuit 340, using splice sleeves supplied with kit.
7.
Tape wire to prevent damage due to sharp metal edges.
8.
Cut to length and splice handle WHT wire to vehicle ORN/BLK wire, circuit 737, using splice sleeves supplied with kit. The vehicle ORN/BLK
wire can be found at decklid in-line connector near base of decklid hinge and will be located in one of the following cavities:
^
Cavity F on Sedans
^
Cavity H on Coupes
