LS2 V6-3.0L VIN R (2000)
9.
Cut to length and splice handle BLK wire to vehicle BLK wire, circuit 550, using splice sleeves supplied with kit. The vehicle BLK wire can be
found at decklid in-line connector near base of decklid hinge and will be located in one of the following cavities:
^
Cavity E on Sedans
^
Cavity G on Coupes
10.
Secure all wires to vehicle with tape to prevent damage.
11.
Connect cargo lamp connector and replace cargo lamp housing if removed.
12.
Install 1OA BODY fuse in instrument panel fuse block.
13.
Reconnect existing latch electrical connector(s) to new latch.