LS2 V6-3.0L VIN R (2000)
1.
Pull on rear seat cushion retainer strap while pulling up on cushion to disengage rear seat cushion forward attachment.
2.
Push rear seat cushion rearward to disengage rear attachment, then lift cushion out of vehicle while carefully routing seat belts through seat
cushion opening.
3.
Remove remains of old drawstring and discard.
Installation
1.
Replace drawstring with p/n 22710493 Lace-F&R/Seat Cush Cvr Seam. Attach a fishwire to one end of the new drawstring and feed through cover
channel.
2.
Cover any sharp edges on the metal seat cushion frame that contacts the seat cover and/or drawstring with cloth tape.
3.
Pull drawstring tight, wrap around retaining loops, and secure drawstring opening to seat cushion frame.
4.
Position rear seat cushion over rear seat floor area.
5.
Route rear seat belts through cushion openings.
6.
Slide rear seat cushion frame into rear attaching brackets.
7.
Push downward at rear seat cushion forward retainers to lock cushion to floor brackets.
8.
Check seat belts for proper routing through cushion.
9.
Push downward on front of seat to secure seat cushion to floor pan.
