LS2 V6-3.0L VIN R (2000)
Brake Rotor/Disc: Technical Service Bulletins
Front Brake Rotor - Thickness Specifications
BULLETIN NO.: 01-T-34
ISSUE DATE: August, 2001
CATEGORY TYPE: Brakes-03
CATEGORY: General
CORPORATION NO.: 01-05-23-007
SUBJECT:
Information on Front Brake Rotor Minimum Thickness After Refinish and Discard Thickness Specifications
MODELS AFFECTED:
2000-2002 Saturn L-Series Vehicles
PURPOSE:
The purpose of this bulletin is to provide revised front brake rotor specifications and to update all 2000/2001 and 2002 L-Series Brakes Service
Manuals.
Please obtain all 2000/2001 and 2002 L-Series Brakes Service Manuals at your location and update as indicated.
1.
In the 2000/2001 L-Series Brakes Service Manual:
^
On page 11, under Front Brake Rotors, cross out the specifications values for Brake Rotors Minimum Thickness After Refinish and Discard
Thickness and write in the values from the table shown.
^
On page 67, in Front Rotor Thickness Chart, cross out the specifications values for Minimum after Turning and Discard and write in the values
from the table.
2.
In the 2002 L-Series Brakes Service Manual:
^
On page 19, under Front Brake Rotors, cross out the specifications values for Brake Rotors Minimum Thickness After Refinish and Discard
Thickness and write in the values from the table.
^
On page 77, in Front Rotor Thickness Chart, cross out the specifications values for Minimum after Turning and Discard and write in the values
from the table.
DISCLAIMER
