LS2 V6-3.0L VIN R (2000)
Brake Caliper: Service and Repair
Rear Caliper
^
TOOLS REQUIRED
-
KM-286 Installing shackle
REMOVAL
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST.
1. Raise vehicle on hoist.
2. Remove rear wheel and tire assembly.
3. Remove brake pads.
4. Remove brake pipe from rear caliper. Plug open brake pipe to prevent brake fluid loss and contamination.
5. Remove caliper to rear axle control arm fasteners.
6. Remove caliper assembly.
DISASSEMBLY
IMPORTANT: The rear caliper has a dual piston design. The caliper must not be completely disassembled. Only disassemble one piston at a time.