LS2 V6-3.0L VIN R (2000)
1. Remove console assembly.
2. Remove park brake adjuster nut.
3. Detach park brake warning switch electrical connector.
4. Remove park brake lever-to-floor pan nuts.
IMPORTANT: Keep tension on park brake cable so it does not disengage from
equalizer.
5. Carefully remove park brake lever from vehicle while guiding cable through lever.
INSTALLATION
1. Position brake lever into vehicle while guiding park brake cable into the lever.
2. Tighten park brake lever-to-floor pan nuts.
Torque: 10 Nm (89 inch lbs.)
