LS2 V6-3.0L VIN R (2000)
12. Remove inlet and outlet hose to heater water pump clamps and remove hoses.
INSTALLATION
IMPORTANT: Heater inlet hose quick disconnect coupling collar is black. Heater outlet quick disconnect coupling collar is white.
IMPORTANT: White line on hoses should always be installed at 12 o'clock position. Install heater hose/heater water pump assembly into manifold
clamp but do not lock clamp.
1. Install heater water pump mount and heat shield to block bolt.
^
Torque: 8 Nm (71 lb in)
2. install heater water pump electrical connector.
