LS2 V6-3.0L VIN R (2000)
18. Install auxiliary water pump inlet hose to radiator end tank and install clamp so that tangs face outward.
19. Lower vehicle.
20. Route auxiliary water pump outlet hose under fan shroud tab then install to radiator end tank and install clamp at 12 o'clock position.
21. Install upper transaxle oil cooler line into radiator end tank retainer.
22. Remove cap and install upper transaxle oil cooler line to radiator end tank.
^
Torque: 25 Nm (18 ft. lbs.)
23. Connect circulation water pump electrical connector and install harness into clip.
