LS2 V6-3.0L VIN R (2000)
5. Remove shoulder belt retractor fastener access plug.
6. Remove shoulder belt retractor fastener.
NOTE
^
Upper and lower moldings will stay attached to each other while being removed.
^
Shoulder belt assembly and height adjuster unit will stay attached to the center pillar upper and lower moldings when the moldings are
removed.
7. Starting at the top, gently pull on center pillar upper molding to disengage attaching clips.
8. Pull on center pill lower molding to disengage attaching clips.
9. Remove shoulder belt from shoulder belt retainer.
10. Remove safety belt guide fastener and remove guide.
