Front Intake Runner Replacement for LS2 V6-30L VIN R (2000) Engine
Intake Manifold: Service and Repair
Intake Manifold and Manifold Spacer Replacement
TOOLS REQUIRED
-
J-43914
Hose Clamp Pliers
REMOVAL
1. Disconnect the negative battery cable.
2. Remove both intake runners.
3. Remove intake plenum.
4. Relieve fuel system pressure. Refer to "Fuel System Pressure Relief" procedure. See: Cylinder Head Assembly/Fuel Pressure Release/Service
and Repair
IMPORTANT: Note: If injectors are not being replaced, it is not necessary to remove fuel rail from manifold when removing manifold.
5. Remove fuel supply hose from fuel rail.
6. Remove fuel return hose from fuel rail.
7. Remove fuel injector electrical harness connector.
8. Remove fuel injector connector.
9. Remove fuel rail.
