LS2 V6-3.0L VIN R (2000)
4.4
Install oil cooler cover to block bolts using torque sequence shown.
Torque:
oil Cooler Cover-to-block
Bolts: 20 N.m (15 ft-lbs)
4.5
Install oil cooler cover to oil cooler nuts.
Torque:
Oil Cooler Cover-to-Oil Cooler
Nuts: 30 N.m (22 ft-lbs)
4.6
Install oil cooler feed and return lines.
Torque:
Cooler Feed and Return Line Banjo
Bolts: 30 N.m (22 ft-lbs) + 30°
5.
Install all components that were previously removed. Verify repair by visual inspection after engine reaches normal operating temperature.
Water Pump
IMPORTANT:
Leave throttle body coolant hoses connected so the system can be pressurized in order to locate leak.
1.
Remove front timing belt cover. (Refer to "Timing Belt Cover Replacement (In-Vehicle) - Front" procedure in the Mechanical Section of the
Applicable Model Year L-Series (L81) Engine Service Manual.)