LS2 V6-3.0L VIN R (2000)
Important:
Install alignment pin in correct numbered, alignment slot on each camshaft gear.
10.
Install camshaft gears.
11.
Install camshaft gear bolts.
Important:
Use new camshaft gear bolts. The required tightening method will stretch to it's yield point therefore, the bolt it not reuseable.
^
Use Timing Belt Alignment Kit J 42069-1 and J 42069-2 to hold camshaft gears and camshaft in place while tightening camshaft gear
bolts.
^
Tighten camshaft gear bolt.
Tighten
Tighten the camshaft gear bolt to 50 Nm (37 lb ft) + 60° + 15°.