LS2 V6-3.0L VIN R (2000)
1. Install exhaust manifold and new gasket
2. Install lower exhaust manifold nuts.
^
Torque: 20 Nm (15 ft. lbs.)
3. Install oil filter housing to block.
^
Torque: 45 Nm (33 ft. lbs.)
4. Install oil filter cap and filter to housing.
^
Torque: 25 Nm (18 ft. lbs.)
5. Install front exhaust manifold pipe assembly and gaskets.
NOTICE: Do not tighten fasteners.
6. Install front exhaust manifold pipe to rear exhaust manifold pipe bolts.
