LS2 V6-3.0L VIN R (2000)
10. Install exhaust manifold pipe heat shield.
^
Torque: 8 Nm (71 inch lbs.)
11. Start engine and check for exhaust leaks.
Exhaust Resonator Pipe
REMOVAL
CAUTION: MAKE SURE VEHICLE IS PROPERLY SUPPORTED AND SQUARELY POSITIONED ON HOIST.
1. Raise vehicle on hoist.
2. Remove exhaust resonator to exhaust manifold pipe bolts.
3. Remove exhaust resonator pipe to rear muffler clamp.
4. Separate exhaust resonator pipe from rear muffler by pulling and twisting in opposite directions.
5. Remove exhaust resonator isolators.
6. Remove assembly.
INSTALLATION