LS2 V6-3.0L VIN R (2000)
Air Door Cable: Service and Repair
REMOVAL
1. Remove control head.
2. Remove R/H console closeout panel.
CAUTION: HEATER CORE PIPES MAY BE HOT!
3. Remove cable from module retaining clip using first two fingers to pull outward on cable while using thumb to spread retaining clip.
4. Remove cable from temperature door lever by squeezing end of pin and pulling cable eyelet outward.
INSTALLATION
1. Route new cable in through control head opening in I/P Cable housing flag goes to control head end.
2. Guide cable outward of I/P support brace.