LS2 V6-3.0L VIN R (2000)
Torque: 5 N.m (44 in-lbs)
8. Install condenser block-to-radiator end tank bolt.
Torque: 5 N.m (44 in-lbs)
NOTE: Do not lubricate seal washers.
IMPORTANT: Always install new seal washers.
9. Remove discharge line cap and install new seal washer.
10. Remove condenser block cap and install discharge line.
11. Hand start discharge line to condenser block bolt.
Torque: 20 N.m (15 ft-lbs)
NOTE: Do not lubricate seal washers.
IMPORTANT: Always install new seal washers.