LS2 V6-3.0L VIN R (2000)
Oil Change Reminder Lamp: Service and Repair
Resetting the Change Oil Soon Light
Remember, after changing the engine oil, the system must be reset. To reset the system:
1. Remove the cover on the fuse relay center under the hood.
2. With the ignition key in RUN and the engine off, press the red "Oil-Reset" reset button and hold for 5 seconds. If the CHANGE OIL SOON light
is flashing, the system is reset.
The light will flash up to 30 seconds or until the ignition is turn off. However, if the light comes on again and stays on for 30 seconds at the next ignition
cycle, it did not reset. You'll need to reset the system again.
