Saturn Workshop Service and Repair Manuals > LS2 V6-3.0L VIN R (2000) > Powertrain Management | Computers and Control Systems | Sensors and Switches - Computers and Control Systems | Manifold Absolute Pressure (MAP) Sensor <--> [Manifold Pressure/Vacuum Sensor] | Component Information | Diagrams

Page 1

Manifold Absolute Pressure (MAP) Sensor: Service and Repair

REMOVAL

1. Disconnect manifold absolute pressure (MAP sensor electrical connector.
2. Remove MAP sensor bolt.
3. Remove MAP sensor.

INSTALLATION

1. Install MAP sensor.
2. Install MAP sensor bolt.

Torque: 5 N.m (44 in-lbs)

3. Connect MAP sensor electrical connector.

Saturn Workshop Service and Repair Manuals